Manufacturing Specimens

  • cement according to EN 196
  • mortar according to EN 1015
  • screed

Mortar Mixer

for the production of mixtures according to EN 196-1, ISO 679, DIN 1164, ASTM C 305, Ö-Norm B 3310 and other standards

Art. no. B2780

  • manual version
  • two mixing speeds
  • pole-changing three-phase motor
  • standardised mixing bowl approx. 5 litres and stirrer made of stainless steel
  • button for switching from 140 U/min. to 285 U/min.

Technical Data:

  • dimensions: 450 x 650 x 850 mm
  • connection: 400 V, 50/60 Hz, 0.5 kW
  • special current on request
  • net weight: approx.: 80 kgs
  • max. mixing weight: approx. 4 kgs

Model also available as ASTM-version.

Mortar Mixer B2780
Mortar Mixer B2780

Mortar Mixer

for the automatic production of mixtures in accordance with EN 196-1, EN 480, EN 196-3 and other standards

Art. no. B2781

  • laboratory mortar mixer in a particularly robust, durable design
  • special programmes available at extra cost
  • electronic speed control switchable between 140 U/min. and 285 U/min.
  • 7“ touchscreen display with intuitive user guidance and display of the set mixing speeds and the current operating status of the selected application programme, in 3 languages (D,E,F)

Technical Data:

  • dimensions: 465 x 610 x 850 mm
  • connection: 110/230V, 50/60 Hz, 0.4 kW
  • net weight: approx. 80 kgs
  • volume of the mixing bowl: 5 litres

Delivery includes:

  • automatic programme with microprocessor control
  • automatic sand feeding device

Art. no. B2782

as Order-No. B2781, but additionally with:

  • automatic water dosing system acc. to EN 196 and ISO 679
  • dosing quantity: 225 ml +/-1 ml
  • filling volume of the storage container: 10 litres

Both models also available as ASTM version.

Mortar Mixer B2781 + B2782
Mortar Mixer B2781 + B2782

Three-Gang Mould

Art. no. B270925

  • for production of cement- and mortar prisms
  • according to EN 196, DIN EN 196-1
  • without bore holes for shrinkage measuring pins
  • all parts chemical nickled
  • surface grinded, webs and nut plates marked
  • dimensions: 40,1 x 40 x 160 mm
  • weight approx. 10 kg

Three-Gang Mould

Art. no. B2709222

as above, but:

  • with bore holes for shrinkage measuring pinstype 1 - form A, B oder C

Demoulding Tool for Three-Gang Mould

Art. no. B2715

  • for easy demoulding
  • ergonomic working
  • specimens are demoulded gently
Three-Gang Mould with Demoulding Tool
Demoulding Tool

Three-Gang Mould

Art.no. B2709

  • acc. to DIN EN 459-2, DIN EN 1015
  • light execution
  • surface galvanized blue
  • dimension 40x 40 x 160 mm
  • weight approx. 10 kg
Three-gang Mould

Three-Gang Mould

Art.no. B270940

• made of white special plastic (Hakorit)
• very low-wear
• stiffned against bending and unbreakable
• self-lubricated
• easy cleaning because no cement or mortar adheres
• no rust possible
• no much time necessary for cleaning
• temperature for use max. +80°C
• temperature for use min. -30°C
• for simultaneous production of 3 test specimens
• dimensions: 40 x 40 x 160 mm

Three Gang Mould

Six-Gang Mould

Art.no. B270942

• made of white special plastic (Hakorit)
• very low-wear
• stiffned against bending and unbreakable
• self-lubricated
• easy cleaning because no cement or mortar adheres
• no rust possible
• no much time necessary for cleaning
• temperature for use max. +80°C
• temperature for use min. -30°C
• for simultaneous production of 6 test specimens
• dimensions: 40 x 40 x 160 mm

Six-Gang Mould

Vibration Table

Art.no. B2808

For compaction of cement and other binding agents
acc. to EN 196-1, EN 12808-3, EN 459, DIN 18555-3

  • for 1 three-gang mould (delivery without mould)
  • with clamping device with rapid clamp lever
  • with vibration width setting (0.4 - 1.0 mm)
  • with vibration width display (digital)
  • with timer (0 - 300 sec.), adjustment at plant = 120 sec.

  • table plate 550 x 350 mm
  • max. load 30 kg
  • weight approx.. 175 kg

Options as an alternative to the quick clamping device:

  • magnetic clamping plate
  • clamping frame for one mould
  • clamping frame for two moulds
Vibration Table

Jolting Table

Art. no. B2830

according to DIN EN 196 Part 1 (Issue may '95) as well as ISO 679

The machine comprises a table which is rigidly connected by two arms with an axle 800 mm away from the middle of the table and placed on a rotating cam plate with a revolving rate of 60 revs./min.

Projection and strokes correspond to a pyramid hardness of at least 500 HV.

The entire mass of the table incl. the arms, an empty triple form (Art. no. B270922), top box and clips is 20 kg +/- 0,5

The appliance is supplied with power connection, automatic counter, start and stop key and automatic switch-off when the test ends.

  • Electric connection 230 V / 0,5 kW
Schocktisch